Channel 2 is fed with the initial signal. The trigger output is connected by cable to input 3. Cursor A is set at the trigger time (-4ns, but it is not important). Cursor B is set at the very beginning of the trigger output edge. The result is a delay of 350ns. If you change the trigger level (marked “T” on the right), the delay doesn’t change at all.

The usage of this python script is as simple as plugging the DS1054Z into your USB port and running the script. A PNG of whatever is on the screen then appears on your drive. Testing has been done on OS X, and it probably works on Linux and Windows. It’s a simple tool that does one job, glory and hallelujah, people are still designing tools this way. The Rigol DS1054Z is an oscilloscope with various features that make it perfect for ham radio enthusiasts. It can measure frequency and amplitude, which is perfect for determining the quality of your signal. It also has an auto-tuning feature that helps you find the best settings for your radio. The oscilloscope also has built-in functions such as automatic power consumption measurement and frequency counter. Is Rigol DS1054Z a good gift for ham radio hobbyist?However, if you want to synchronize an external logic analyzer with a buffer and configurable trigger position, it’s not so bad. But it is necessary to keep this delay in mind because the hardware trigger output of more expensive units gives a delay a hundred times smaller. This work was inspired by the efforts of [cibomahto], who spent some time controlling the Rigol with Linux and Python. This work will plot whatever is being captured by the scope in a window, in Linux, but sometimes you just need a screencap of whatever is on the scope; that’s why there were weird Polaroid adapters for HP scopes in the day.

The Rigol DS1000Z series are a very high quality four channel digital storage oscilloscopes. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 50 MHz to 100 MHz. The signal curves, the FFT display, and other functions can be shown simultaneously on the display. Model All products in the DS1000Z series features a high-quality screen with an excellent easy to use interface that lets you access signal information such as frequency, period, rise time, pulse width and much more!

Please select a product to add to your quote

The Rigol DS1054Z and Siglent SDS1202X-E are two of the most popular oscilloscopes in the market. They are both used for measuring electrical signals. But which one is better? The Rigol DS1054Z represents a remarkable breakthrough in price and performance. It's one of the best general-purpose 4 channel digital storage oscilloscopes available for the maker electronics space. Inside the HMCAD1511 is a four-channel reconfigurable ADC, providing an aggregate speed across all channels of 1 GS/s. Accordingly, with two channels, it is 500, and with four channels, it is 250. A little bit about frequencies: in spite of advertised capture frequencies of 500 MHz and higher, above 100 MHz, logic analyzer clips make such an impact on the circuit that its behavior becomes absolutely different from the state without clips. But even leaving this aside, let me quote an excerpt from a description of the 1000z series logic analyzer: When I was choosing an upgrade, I, of course, looked to see if there is any other option of Rigol that meets the initial criterion “inexpensive for 4 channels”. The following is a brief comparison of the Rigol series.