See if anyone you know has managed to attach a TV to a wall without drilling and see how they’ve done it. This can help you get some basic understanding of what you want to do as well. Although clips/rails can make holes in your walls, the holes can easily be patched. The holes they leave behind are generally quite small and not very noticeable. The great news is that nowadays most TVs are not that heavy, which makes this option to be considered as a good solution.

The days of old bulky televisions with cathode ray tubes are far behind us. Nowadays, our homes are decorated with LCD and plasma screens, which seem to get thinner and lighter every year. And let’s not forget the better visual experience! And not only that, most of these stands come equipped with shelves so you can (discreetly)put away the cables or gaming consoles, for example.The no-stud wall mount will still damage the wall, but the holes are much smaller and easier to fill than large drilled holes. What is a No Stud Wall Mount, and How Do You Install It?

Just a few of these clamps can carry an item up to 13 kilograms, but you’ll need additional clamps if your TV is heavier.Remember to cut the conduit slightly oversized, so there is a little poking through the junction box on each end. Ensure that the surface of your concrete wall is clean and free from dust or debris before attaching any adhesive mounts. A thorough cleaning will help improve adhesion and prevent any accidental falls. Ideally, this should be around eye level because watching a TV that is too high or low for long periods can be uncomfortable. The clips can hold about 30 pounds (13kg), so using two or three might support the weight of a small TV. Easy to Install] The wall mount is easy to install in just 3 steps with decent instructions and level. Please note that not all our TV mounts are for dry wall alone. Additional concrete anchors may be required and are available through Mounting dream team with the sizeφ10x50mm. Please refer to MD2268-XL if prefer one-piece wall mount

When it comes to choosing an adhesive for your TV wall mount, there are many factors to consider. The most important factor is the weight of your TV. You need to make sure that the adhesive you choose can support the weight of your TV.You won’t be mounting your TV to the wall with a hybrid TV stand; instead, you’ll be using the included mount. This alternative, however, protects your wall while also saving you room. Typically, these stands are designed to fit in with the décor so that the TV seems to have been installed in the wall. These are adhesive strips that come with removable hooks. You can apply the strips to your wall and then hang your TV from the hooks. The great thing about using Command strips is that they won’t damage your walls and they’re easy to remove when you want to take down your TV. The rail would have to be secured to the wall so that your TV doesn’t fall. However, once in place, your TV should be quite safe from falls. You can add the extra measure of adhesives here, but it would disable you from moving your TV against the rails. This option is most likely the least effective in the feat. It does involve some tapping into concrete. However, the holes are usually too small to notice and can be easily plugged in again. This method is characterized by small plastic screws that you can tap in walls (normally drywall) to hang objects such as TVs. Pros

Another option is rails, which allow you to hang the TV on the wall securely. If you want a combination of modernity and safety, go with the hybrid TV stand. And if you prefer old school, the standard TV stand won’t let anyone down.

Main Topics

You can also use aftermarket tv stands. These are great if either your lease or rental agreement doesn’t permit you to drill holes in the wall. These stands come as either tabletop stands or tv floor stands. Non-intrusive adhesive hangers enable you to place your television without damaging your wall. However, you should also take into account the negatives. Adhesives, as previously noted, are a dangerous choice. To get started, you first need to prepare your surface. Start by measuring your TV and marking the spots where you’ll attach it to the wall. Make it level and straight — you don’t want the TV to be all crooked once the adhesive has set.