Adjustable temperature range from 0°C to 70°C using an easy-to-use controller on the top of the heater. Septic Tanks Onion Shaped Septic Tanks Shallow Dig Septic Tanks Sewage Pump Stations Single Pump - Sewage Pump Stations Twin Pump - Sewage Pump Stations Above Ground Sewage Pump Stations Waste Water Pumps Basement Drainage Pumps Grey Water Pumps Sewage Pumps More Waste Water Pumps They come with eyelets in each bottom corner as standard. This allows the cover to be completely tied to the IBC, securing the cover and further protecting your IBC. You won’t have to worry about losing your cover in the wind if you’re storing your IBC outside. The eyelets also mean that you can tie your cover tightly to the IBC, further preventing dust and dirt getting to your container. We are key suppliers to and support a wide array of specialist industries from ink and paint, brewing, catering, pharmaceutical, cosmetic, chemical, grease, automotive, textiles and many others.

TIP! For a faster and optimal heating process, we recommend using the IBC insulated lid(sold separately).The lid easily attaches to the top of the container, reducing waste of heat.(Shown above) The silicone base heater is easy to install and to use - simply remove the bulk container from the IBC frame and install the silicone heater in the very bottom of the frame. Insert the container on top of the heater, fill the container, and you are all set to heat the contents. This also makes the heater ideal for heating and maintaining temperature while transporting the IBC container.IBC covers can protect your product in a number of different ways. Our elasticated IBC covers fit tightly over the top of the container to protect the openings from any dirt and dust while also keeping moisture out. Our woven IBC covers are designed to more fully protect your intermediate bulk container, covering it almost entirely. This helps keep the entirely of your container covered and protected whilst in transport or storage. Made from tough and waterproof material, and also featuring eyelets for securely tying the cover to your IBC, our woven IBC covers are especially great if you need to store your containers outside for any length of time. Cylinders Direct Hot Water Cylinders Direct Slimline Hot Water Cylinders Heat Pumps Horizontal Hot Water Cylinders Indirect Hot Water Cylinders Indirect Slimline Hot Water Cylinders Megaflo Hot Water Cylinders Solar Hot Water Cylinders Water Tanks (by Capacity) 1 - 100 Litres 101 - 250 Litres 251 - 500 Litres 501 - 1000 Litres 1001 - 2000 Litres 2001 - 5000 Litres 5001 - 10000 Litres 10001 - 20000 Litres 20001 - 50000 Litres More Water Tanks (by Capacity) Heating with an IBC Aluminium Foil Heater is an effective and low-cost method to heat the contents from the bottom inside an IBC container.

Deso Direct Pumps & Tanks Ecosure Enduramaxx Harlequin Kingspan Parts Purewater Romold Stuart Turner Wydale All Brands The aluminium foil heater is designed as a "single use" heater, which means that the product is to be discarded when used. Technical Specifications

Our range of IBC covers come with varying degrees of waterproofing and weatherproofing. If you think that you need a covering solution for your IBC, there’s a good chance that the reason is that you want to protect your contents from dirt, dust and moisture. If you’re transporting or storing your IBC and it’s spending a lot of time outside, you want a cover that is going to protect both your IBC and its contents from the weather. When it comes to protecting the top of your IBC and the main opening of the container, elasticated dust covers are a great way to securely protect from contaminants like moisture and dirt. These covers fit snugly around the top of the IBC thanks to their elasticity, forming a secure and loose cover against the environment. If you want to entirely cover your IBC then woven IBC covers are great for this. Made from durable material, our woven covers are hard wearing and resistant to damage, as well as protecting your IBC and product from dirt and dust. These IBC covers are often used in storage areas and come with eyelets as standard, allowing you to securely tie the cover to your IBC.

The covers are anti-static, and food approved as a standard, but other materials are available on request. Our UV IBC covers are excellent for protecting your containers and product against sun damage. They also provide protection against dirt, dust and moisture because they cover the entire IBC. These covers are for 1000ltr IBCs, but we can also provide 600ltr, 800ltr and 1200ltr UV IBC covers.C & L Clearwater Direct Pumps & Tanks Harlequin Kingspan Klargester Kingspan Parts Oaklands Environmental Premier Tech Spel Tanks Direct All Brands Channel Islands, Isle of Man, Isle Of Wight, Anglesey, Isles of Scilly, Western Isles, Orkney Islands, Shetland Islands, Northern Ireland & Republic of Ireland, Scottish Highlands and Offshore Islands and also areas north of the Glasgow/Edinburgh line including the following postcode areas: The lifespan of IBC tanks can vary depending on several factors. The duration of their functionality will be influenced by the materials they are made from, the quality of construction, and how well they are maintained. Generally, IBC tanks made from high-quality materials like stainless steel or robust plastics such as HDPE can last anywhere from 5 to 20 years or more with proper care. The standard insulation cover can also be used with an IBC Foil heaterto speed up theheating process.In this way the insulation coverhelps to insulate the containerand speeds up the heating process.

These covers are durable and tough. They’re made from woven polypropylene fabric, which means that they won’t be damaged easily and can last longer for repeat use. For an IBC cover that’s great for indoor and outdoor use, that protects your IBC and can be used repeatedly, choose our woven IBC covers. There are eyelets at the bottom of the cover, so you can fix it to your IBC securely and have peace of mind it won’t become detached from a container and leave it exposed to harsh weather conditions.The Insulation cover is a one-piece cover, which is easily installed by pulling it down over the IBC container – the insulating cover has a Velcro input from the top so that the IBC container top lid easily can be accessed. Technical specifications: IBC tanks are not inherently designed or intended for potable water use. Our IBCs are typically made from materials like high-density polyethylene (HDPE) or metal, and they are primarily used for storing and transporting non-toxic liquids, chemicals, and granulated materials. They are not specifically manufactured to meet the strict requirements for storing and transporting potable water.