The main differences are that cordless models are typically unable to achieve the same peak temperatures as corded models, are not rated in watts, and runtime is dependent on the capacity rating of a battery (measured in amp hours, or Ah.) As for the specs, a power input of 2000 Watts pushes the heat up to 550° C at 550 litres per minute. Weighing in at close to 1 kg, it’s not exactly heavy but it’s a bit weightier than the competition. You get two selectable modes to choose from as well. There’s 20 Watts more power under the hood than the DeWalt. It uses this extra grunt to give you 50°C more in low fan mode. This might come in handy for more delicate work.

Use a heat gun to reflow solder. This is for when you’re trying to take components apart, not for initial soldering. That should always be done with a soldering iron. A lot of solder is now lead-free, but not all. Lead is toxic, so unless you’re absolutely sure of the origin, always have good ventilation and wear a respirator. Compared with the Ginour heat gun kit, you get the nozzle accessories but no scrapers. It’s a shame, for the price I’d expect them included. The Chandler Mini Heat Gun is ideal for craft applications—it has a compact design that’s easy to store, and it has two temperature settings for different tasks. On the low setting, it reaches around 392 degrees Fahrenheit, while the high setting gets up to 572 degrees Fahrenheit. You can’t argue with a heat gun kit that includes a paint scraper and putty knife. Even if you’ve already got one, having spares is great.

Top 11 Product Ratings

These hot air machines are the little brothers of the standard DIY units. Unlike their more substantial siblings — which tend to be about the size of an electric drill — mini heat guns are much more compact. This 3-in-1 heat gun is powered by butane gas, allowing you to use it anywhere without worrying about power cords or dying batteries. The multifunction tool is a mini torch, flameless heat gun, and soldering iron, and it runs for up to 90 minutes each time you fill the fuel chamber.

The first thing to think about when purchasing a heat gun is its power source. Heat guns often have a power cord that can be plugged into a standard outlet, but if you’re planning to use the tool somewhere that outlets aren’t available, you may want to opt for a cordless, battery-powered model. (Keep in mind that cordless models have a limited runtime before they need to be recharged.) Alternatively, there are select gas-powered heat guns, which typically run on butane. Heat guns can get very, very hot. Whenever practical, wear heat-proof gloves. If you’re stripping paint, wear a respirator to protect you from unpleasant and potentially toxic fumes. Key considerations What can a heat gun do?These are often provided with the heat gun. They range from fan-shaped designs for stripping paint to curved shields for shrinking tubing. You might also get scrapers or other accessories. When you’re choosing between two very similar heat guns, each nozzle potentially adds to the product's worth. Power cable

Compared with most full-size heat guns, this hot air machine looks more like an oversize board marker. You hold it like a pen rather than a pistol, and it creates a much more localised heat patch than one of the big boys. This well-designed heat gun is ideal for a variety of uses, and it’s hard to beat its low price. It has two fan speeds, as well as a variable temperature control dial, and its temperature can be set to an extremely wide range—between 120 and 1,200 degrees Fahrenheit. The JUSONEY mini heat gun is a beautiful purple gun with incredible features. If you want to work on significant resin and other art/crafts projects in less time and effort, this one is best for you because it has high speed and heat settings for the speedy completion of large tasks. The Chandler Tool Heat Gun is an excellent tool for DIY projects and crafts, like melting wax, eliminating bubbles in resin castings, bending plastics on small models, and shrinking heat-shrink tubes onto wires. Its compact and ergonomic design makes it comfortable to hold, and its low weight makes it easy to maneuver and store when not in use. It would be best if you prefer a heating gun with adjustable airflow. If you are working with light materials or close to delicate surfaces that you don’t want to damage by the heat, you can reduce the force of the blow from the nozzle by adjusting the airflow control. Similarly, you can increase it for faster results and airspeed. Accessories and nozzles

Analysis and Test Results

It’s nice and quiet compared to the Vonhaus heat gun. It’s rated to about 3 dB, which is a little less than a regular hair dryer on high speed. Typically, they deliver a temperature output of around 370 degrees Fahrenheit — making them equally suited to the DIY enthusiast and arty hobbyist.

This can be as long as ten feet, but most are shorter. If you need to use an extension cord, make sure it’s of sufficient gauge to handle the demands of the tool. Cordless heat guns overcome this problem, but at the time of writing there were only a few available, and they are very expensive. Overload protection Everyone thinks heat guns are the best secret keepers. You can use them anywhere for any project. These work like the air dryer; they draw the air with a fan forcing it across a heating element, then pushes it through a nozzle to create superheated air. SEEKONE is an excellent heat gun that can suit any art craft work. As you know, advanced features are rare in heat guns, but it has built-in new features. It has a dual temperature setting, and you can change the temperature as you want. The DeWalt D26411-GB is probably the best heat gun you can find right now. It’s robust, powerful, and has a stable base for hands-free use. DeWalt is one of the best known and most loved power tool brands in the world, and I couldn’t wait to get my hands on their heat gun. With the solid standing surface and strong handle, you can use it easily. With an airflow velocity of 100 l/min and 350 Watts of power, you can change and control the temperature of this hot air tool up to 400 C. The inbuilt LED work light is essential for precise heating in dimly lit areas.

Another full kit, this is an ideal heat gun to buy if you want all the accessories thrown in. The build quality isn’t exactly as good as the DeWalt or the Bosch. However, for this price, you’re not going to argue too much. This is of major importance. Small devices often only need to work within a narrow temperature band and may do no more than reach a fixed temperature of a few hundred degrees Fahrenheit. General-purpose heat guns offer a wide range — from as little as 150°F to over 1,000°F. Others can be more function-specific and, while powerful, deliver a smaller operating range. It’s not always about having the greatest flexibility. Sometimes it’s more significant to have the correct heat for the task you’re undertaking. Heat control To find the best heat guns for a wide range of applications, we looked at models from a variety of reputable brands. We prioritized products with at least a 4-star rating from reviewers and evaluated each model for its temperature range, ease of use, and useful features, like a built-in stand or included attachments. Once we narrowed down our selection, we sorted products into categories based on their ideal use case, aiming to include a variety of heat guns to suit different applications and budgets.