If this continues, clean the record side again because it isn't truly clean yet. Please keep in mind that the accumulation of grime on the stylus is not G2 Fluid. It is the grime in the groove that G2 Fluid has loosened but is difficult for the microfiber pad to remove.

Putting the “Ultra” in ultrasonic record cleaning! G-Sonic is the additive your ultrasonic machine needs. G-Sonic reduces the water’s surface tension so the cavitation can reach the bottom of the microgroove. In the last 2 years alone, the company has introduced an impressive amount of new products, from their stronger G3 formula for very dirty records, to a brand new surfactant fluid designed to aid ultrasonic record cleaning baths. Additional Record Cleaning PadsGrooveWasher does offer G3 Fluid for heavier cleaning needs. G3 is a more powerful formula that does require a rinse with GSR Super Rinse or distilled water. At risk of sounding like a broken record (pun intended), we’re big fans of the GrooveWasher record cleaning kits here at Sound Matters. Their flagship G2 record cleaning fluid is our go-to day-to-day record cleaning fluid.

One 8 ounce bottle of G2 Fluid with spout top. Use to refill the 2 ounce and / or 4 ounce mist spray bottle. 1,000+ mist sprays in this 8 ounce bottle. Several cleanings using GrooveWasher G2 Fluid may be required to remove these difficult contaminants.Some vinyl cleaning fluids on the market are plain distilled water with limited cleaning action. Others have a high level of alcohol which can harm vinyl records. Some leave a layer in the microgroove that reduces sound fidelity. As the saying goes, there’s more than one way to shine a penny. That said, I’ve been using GrooveWasher products on my records for over five years now, and I find they work exceptionally both manually by hand and in conjunction with a record cleaning machine. This is a common issue with pure distilled water that is usually rectified by adding a tiny amount of surfactant to the water. Adding just a small amount of surfactant can break the water tension and aid the cleaning process.

Born out of fundamental research from the classic 1970s DiscWasher cleaning system, GrooveWasher has taken the reins and developed a new record cleaning kit fit for the 21st-century vinyl revival. Notes:Clean and set up your stylus in one smooth procedure with this clever dual-purpose tool. 110 kHz ultrasonic waves clean the tip in 20 seconds, then the built-in pressure gauge can be used to measure and set downforce. Traditionally designed to clean difficult to reach crevices on keyboards, these products (in theory) sink into the record groove, pulling out dust and dirt.

Join In

This product is intended for hard surfaces only. Using this product on skin, eyes or clothing can cause irritation and is not recommended. Do not drink . Non-flammable. Environmentally non-hazardous. The G2 record cleaning fluid is formulated to clean vinyl records with outstanding activity in removing sound degrading microdust, fingerprint oils, manufacturing compounds and mildew, without residue or any harm to the record’s surface. I would advise steering clear of record cleaning kits that contain fluids with high amounts of isopropyl alcohol. While the jury is still out on what level of alcohol (and type) is safe to use in record cleaning fluids, it’s best to steer clear of formulas with very high amounts. Only time will tell over the coming months whether or not the HumminGuru replaces my Pro-Ject cleaning machine or not. Watch this space as I continue to test the machine with vintage vinyl finds. Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.

The GrooveWasher cleaning pad fabrics have been tested in the GrooveWasher laboratory and plant. Split microfiber, one of our cleaning fabrics, is many times more effective than other record cleaning fabrics. During the cleaning cycle, I did notice a fair bit of water surface tension. You could see how the water sat on the record surface and struggled to penetrate the groove. Drip stand (drying stand) with collection tray for up to 15 LPs or singles (slides into the case after use).The microfiber cleaning pads should be cleaned regularly and occasionally replaced for best results. The downside of cloths for cleaning vinyl records is, of course, that a dirty cloth or pad could spread dirt and dust to the next record you clean. To ensure this isn’t the case, regularly remove the pad and clean it by applying dish soap and distilled water. Massage the pad and thoroughly rinse it, followed by a squeeze to remove moisture. Allow it to air-dry overnight before using. It’s worth investing in a few copies of the removable velcro pads so that you can rotate and clean them regularly. The Bottom Line Some features of the Tonar Knosti Disco-Antistat Ultraclean: The cleaning time can be conveniently adjusted to the degree of soiling of the record, supported by a functional display. A clearly visible progress indicator informs about the cleaning status at a glance. A series of adaptors hit the market to make ultrasonic record cleaning more obtainable, enabling collectors to use cheaper general-purpose ultrasonic cleaners to clean records. These products work well, but are far from compact, making them difficult to store. Disco-Antistat Ultraclean Concentrate, works deep into the groove and cleans your records gently and thoroughly even from stubborn dirt. Drain the static charge from your records and lift any residual dust and grime. The conductivity of the brush's ultra-fine goat hairs eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound. The hair reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.